What comes to your mind when you think of an IP address? It’s not just Internet Protocol Address which is known to the most; it is a numerical label assigned to each device like the router connected to a computer network that uses the internet protocol for communicating with each other. By default, most of the manufacturers prefer using 192.168.0.1 or 192.168.1.1 as the local area network (also called LAN) IP address.

This address is what you should be entering in the browser’s address bar to get the router configuration details. 192.168.0.1 is generally called as the host address. You will obtain the entire Username and Password list for TP-Link, Cisco, D-Link, Linksys, Netgear, Asus, Belkin, and Billion Router and Modem using this host address.

NOTE: Always type correct IP address in your browser i.e. “192.168.0.1.” Most of the times we end up typing wrong IP such as http //192.168.0.1, www.192.168.0.1, http//192.168.0.1, 192.168.01, 192.168.0.l, 192.168.l.0, http //192.168.o.1, 192.168.0.1/, 192.168..0.1, http://192.168.0.1., https //192.168.0.1.

Now let’s take a more in-depth look at the most common IP address for routers, i.e., 192.168.0.1. After reading this, you’ll probably be able to make the router login to this IP address directly.

About 192.168.0.1 IP Address

192.168.0.1 is a private IP address of Internet Protocol version 4 (in short, IPv4) network. It is an IP address of most of the wireless routers or ADSL modems. The configuration details of a particular router system could be viewed or accessed using this default host address. If you want to take a look at the management console of routers, you can only access it by visiting 192.168.0.1 IP address. You can directly type this address on the address bar or URL bar.

On a serious note, do not type 192.168. O.1 instead of 192.168.0.1 as most of them make the mistake of typing O instead of 0. This can lead to a fatal error. You won’t be redirected to the admin page unless you rectify it. So, try typing the host address correctly to avoid such silly mistakes.

How to Login 192.168.0.1 IP Address

Here’s a step by step guide on how to log into the IP portal:

1. First, make sure that your Router is connected with your PC.

2. Then click on the below “Access Router Page” button.

Access Your Router Admin Panel

0%





NOTE: Please wait for 4-5 seconds to load the Router Panel completely. Also, if you’re getting an error or the web page is not loading then it’s not your IP address. Find your router’s IP address in the following article.

3. Afterwards, you’ll be redirected to the admin login page where you need to enter correct username and password.

4. If you never changed the default username and password of the router then feel free to type “admin” in both the fields. Alternatively, you can check out the default router usernames and passwords list to confirm the login details of your WiFi Router.

Such as:

User: admin 
Password: admin

NOTE: If you can’t find the login page even after typing the host address correctly, then there’s an issue with your PC or router.

In that case, you have to check for the following things:

  • 192.168.0.1 is not your IP address. It could be 192.168.1.1 or some other address.
  • The router is working correctly or no. If yes, then it should be on.
  • LAN wire connected correctly to your system or not.

5. If you forget the router’s username & password, then go through this guide to recover router user & password within a few minutes.

If there are issues like these, you can search for the reset button which is usually present somewhere on the body of a router or modem. It will generally be like a push button or a tip of a pen. You’ll have to push it in for it to activate. Moreover, to revert the router to its factory settings, you’ll have to hold the button for 10 seconds. You can either use a pen or a sharp object like a needle to keep it. This can resolve all the small login issues.

How to Find Your Router’s IP Address

There could be possibilities where 192.168.0.1 need not necessarily be your router’s IP address. It can be 192.168.1.1 or some other address. Chill. You don’t have to worry cause this issue can resolve quickly.

To find out default IP address, simply go through our default router IP address list or give a read to a tutorial on how to find router IP address in case you’re not able to find it.

Router’s Default Username & Password List

Below is a list to find default Username & password of your router in case you haven’t made any change:

2WIRE
3COM
3M
3WARE
ACCELERATED NETWORKS
ACCONET
ACCTON
ACCTON T-ONLINE
ACEEX
ACTIONTEC
ADC KENTROX
ADIC
ADTRAN
ADVANTEK NETWORKS
AETHRA
AIRTIES
ALAXALA
ALCATEL
ALLIED
ALLIED TELESYN
ALLNET
ALTEON
AMBIT
AMITECH
ANDOVER CONTROLS
AOC
APC
APPLE
ARECA
ARESCOM
ARTEM
ASANTE
ASCEND
ASCOM
ASMACK
ASMAX
ASPECT
ASUS
ATLANTIS
AVAYA
AXIS
AXUS
AZTECH
BAUSCH DATACOM
BAY NETWORKS
BELKIN
BENQ
BILLION
BINTEC
BLUE COAT SYSTEMS
BMC
BMC SOFTWARE
BREEZECOM
BROADLOGIC
BROCADE
BROTHER
BUFFALO
CABLE AND WIRELESS
CABLETRON
CANYON
CAYMAN
CELERITY
CELLIT
CHECKPOINT
CIPHERTRUST
CISCO
CNET
COM3
COMPAQ
COMTREND
CONEXANT
CORECESS
CREATIVE
CTC UNION
CYBERGUARD
CYCLADES
D-LINK
DALLAS SEMICONDUCTORS
DATACOM
DATAWIZARD.NET
DAVOX
DD-WRT
DEERFIELD
DELL
DEMARC
DEUTSCH TELEKOMM
DEUTSCHE TELEKOM
DEVELCON
DICTAPHONE
DIGICOM
DIGICORP
DRAYTEK
DYNALINK
E-CON
E-TECH
ECHOLIFE
EDIMAX
EFFICIENT
EFFICIENT NETWORKS
ELSA
ENTERASYS
ENTRUST
ERICSSON
ESP
EVERFOCUS
EXABYTE
EXTREME NETWORKS
F5
F5-NETWORKS
FLOWPOINT
FORTINET
FOUNDRY NETWORKS
FREETECH
FUJITSU SIEMENS
FUNK SOFTWARE
GERICOM
GIGA
GVC
HP
HUAWEI
IBLITZZ
IBM
IHOI
IMAI
INCHON
INFOSMART
INTEGRAL TECHNOLOGIES
INTEL
INTEL/SHIVA
INTENO
INTERBASE
INTERMEC
INTERSHOP
INTERSYSTEMS
INTEX
INVENTEL
ION
IPSTAR
IRONPORT
JAHT
JD EDWARDS
JDE
JDS MICROPROCESSING
JUNIPER
KALATEL
KONICA MINOLTA
KTI
KYOCERA
LANCOM
LANTRONICS
LANTRONIX
LATIS NETWORK
LG
LINKSYS
LIVINGSTON
LOCKDOWN NETWORKS
LOGITECH
LONGSHINE
LOOPCOM
LUCENT
MARCONI
MAXDATA
MCAFEE
MCDATA
MEDIATRIX 2102
MEDION
MEGASTAR
MENTEC
MERCURY
MERIDIAN
MICRONET
MICROPLEX
MICROROUTER
MICROSOFT
MIKROTIK
MILAN
MINOLTA QMS
MINTEL
MITEL
MOTOROLA
MRO SOFTWARE
MUTARE SOFTWARE
NAI
NEC
NETCOMM
NETGEAR
NETGENESIS
NETOPIA
NETPORT
NETSCREEN
NETSTAR
NETWORK APPLIANCE
NETWORK ASSOCIATES
NETWORK EVERYWHERE
NEXXT SOLUTIONS
NGSEC
NIKSUN
NIMBLE
NOKIA
NORTEL
NRG OR RICOH
NULLSOFT
OKI
OLITEC
OLITEC (TRENDCHIP)
OMNITRONIX
OMRON
ONIXON
OPENCONNECT
OPENWAVE
ORACLE
ORANGE
ORIGO
OSICOM
OVISLINK
PACIFIC MICRO DATA
PANASONIC
PENRIL DATABILITY
PENTAGRAM
PENTAOFFICE
PENTASAFE
PERLE
PHOENIX V1.14
PIRELLI
PLANET
POLYCOM
PRESTIGIO
PROXIM
PSION TEKLOGIX
PYRAMID COMPUTER
QUINTUM TECHNOLOGIES INC.
RADWARE
RAIDZONE
RAMP NETWORKS
REDHAT
RESEARCH
RICOH
RM
ROAMABOUT
SAGEM
SAMSUNG
SCIENTIFIC ATLANTA
SENAO
SERVER TECHNOLOGY
SHARP
SIEMENS
SIGMA
SIIPS
SILEX TECHNOLOGY
SITARA
SITECOM
SMARTSWITCH
SMC
SNAPGEAR
SOLUTION 6
SONIC-X
SONICWALL
SOPHIA (SCHWEIZ) AG
SORENSON
SPEEDCOM
SPEEDSTREAM
SPEEDXESS
SPHAIRON
SPIKE
SUN
SUN MICROSYSTEMS
SWEEX
SWISSVOICE
SYBASE
SYMBOL
SYSTEM/32
T-COMFORT
TANDBERG
TANDBERG DATA
TANDEM
TEAM XODUS
TEKLOGIX
TELCO SYSTEMS
TELEDAT
TELETRONICS
TELEWELL
TELINDUS
TELLABS
TENDA
TERAYON
TIARA
TOPSEC
TRENDNET
TRICHEER
TROY
TVT SYSTEM
U.S. ROBOTICS
UBEE
UNEX
UNIDEN
UNISYS
US ROBOTICS
US21100060
V-TECH
VASCO
VERIFONE
VERILINK
VIRGIN MEDIA
VISUAL NETWORKS
VODAFONE
VONAGE
VXWORKS
WANADOO
WANG
WATCHGUARD
WESTELL
WYSE
X-MICRO
XAVI
XD
XEROX
XYLAN
XYPLEX
YAKUMO
ZCOM
ZEBRA
ZONET
ZOOM
ZTE
ZXDSL
ZYXEL

What to Do if I Forget Router Username And Password?

I’m sure most of us can’t remember the username and password of our router for an extended period. Well, thanks to our memory!

On a serious note, there are three things you can do to recover your username and password:

  1. You can reset the router back to its factory settings.
  2. However, you can change the router password using administrator privileges.
  3. Can reset the router using a web-based setup page.

Best way to deal with this situation is to reset the router to the factory settings just by pressing the reset button using a pin or toothpick which is present somewhere on the body of the router. Hold it up to 10 seconds. Your router will reset itself to factory default mode.

How To Troubleshoot Router Errors?

Most of the times while using a router, you may experience that the router does not show any signs of activity. For example, it will not respond to commands or instructions even when you connect to the network. Such issues can be fixed easily by taking care of a few things:

Check Power Supply

This is the most common cause for such a response of the router. Many times in over-excitement or hurry, we fail to turn on the power supply, and it gives a notion that the router is out of order.

Use Proper Quality Cables

While using cables for connecting to the router, we generally tend to overlook the role of wires. A quality cable is essential for the smooth functioning of a router; thus it should not be neglected at all.

Check the Router Signals

The router signals are an indication of the response of the router. Thus, while facing an issue with the router, you should always check the LED lights on the router. If they are not working, it is time to take serious action.

Final Words

All in All, these are some of the points to ponder about the functioning of 192.168.0.1 and how you can efficiently make use of your router using this host address. So, if you have any queries regarding the host address and router, you can ask us. Also, comment down in the section below, and we’d be glad to help you out.

0 Shares

6 COMMENTS

  1. I was writing it wrong for my router. I was so confused between 192.168.0.1 and 192.168.16.1. Thanks for providing a clean guide.

LEAVE A REPLY

Please enter your comment!
Please enter your name here